Configuration Details:
• Replaces factory straw chopper rotor, floor and stationary knife bar.
• Factory chaff spreading system remains in use.
• Chaff is spread with straw on STS models.
• Spreads 25' to 45' wide with use of 12 vane tailboard.
• Cuts material finer with the 1" tight knife bar spacing.
• Reverse blades when initial blade edge is worn.
• Knife bar bank breaks away when needed - minimizing damage.
• Residue is projected farther - minimizing dust around the combine.
• Achieve an even distribution of residue across width of the cutter bar.
|
)
)
)
)